The supplied dongle will be either a FlexID-9 (green) or FlexID-10 (blue) USB key, each of which requires its accompanying license file (*.lic) in order to run WaveFarer. Before the licensing software will recognize the USB key, driver software must be downloaded and installed on the machine.

Install only the needed USB key driver and follow the installation instructions in the appropriate section below. After completing the FlexID driver setup, rebooting the computer helps ensure that the installer's changes take effect. Afterward, insert the USB key into a free USB port on the computer and continue on to the USB Key Licensing instructions.

Install Driver on Windows

For FlexID-9 (green) USB keys, install the driver software on Windows:

  1. Unplug key if already plugged in.
  2. Download Remcom_9-Key_Driver_Installer.exe
  3. Run Remcom_9-Key_Driver_Installer.exe
  4. Finish the installation as instructed.

For FlexID-10 (blue) USB keys, install the driver software on Windows:

  1. Unplug key if already plugged in.
  2. Download FlexID_Dongle_Driver_Files-Windows.zip
  3. Unzip the file and run FlexID_Dongle_Driver_Files/Windows/FLEXId_Dongle_Driver_Installer-v16.0.0.exe
  4. Select FLEX id 10 Drivers, when appropriate.
  5. Finish the installation as instructed.

Install Driver on Linux

Install the USB key driver software on Linux:

  1. Unplug key if already plugged in.
  2. Download FlexID_Dongle_Driver_Files-Linux.zip
  3. Unzip the file and install the appropriate RPM for the platform (RedHat) and USB key (FlexID-9, green or FlexID-10, blue)

This is typically done using the RPM command as the root user, e.g., rpm -ivh FlexID_Dongle_Driver_Files/RedHat-FlexID-10/WkRt-Lin64-6.0.501.1.x86_64.rpm